MGB & GT Forum
Removing the rear brake flexi hose
Posted by eng622
Topic Creator (OP)
Apr 16, 2024 03:33 PM
Joined 4 years ago
67 Posts
|
Have a set of flare wrenches and the front union and flexi lock nut came undone 9/16 AF but used 14 mm. The problem is the rear of the flexi will not budge in the 3 way union. Read all should be 9/16 but had to use 15 mm, the hex not that rusty so does not look to be an imperial size.
Is there any way to remove the flexi hose without undoing the other pipes, cutting the hose which would allow removal if can be got off the bracket.
The 3 way unions on sale appear to be brass but mine is not brass coloured but grey so could be steel. It has the copper washer. The pipes look fairly new, the right short one is copper but the left one over the axle is grey so assume plated steel. Trying to minimise the work involved.
Is there any way to remove the flexi hose without undoing the other pipes, cutting the hose which would allow removal if can be got off the bracket.
The 3 way unions on sale appear to be brass but mine is not brass coloured but grey so could be steel. It has the copper washer. The pipes look fairly new, the right short one is copper but the left one over the axle is grey so assume plated steel. Trying to minimise the work involved.
Apr 16, 2024 04:03 PM
Top Contributor
Joined 2 years ago
235 Posts
|
Forums
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster