MG Magnette Forum
speedo drive problem
Posted by cooke
Topic Creator (OP)
Sep 1, 2014 09:30 AM
Joined 10 years ago
214 Posts
|
I got a speedo drive gear for the magnette but I am pretty sure its not correct. I the gear does not mesh with the transmission gear, when I put the drive in the trans. it just turns freely it does not engage with the trans gear. The speedo drive is about 3/4ths of an inch in diameter and about 1/2inch thick, I can get a precise measurement when I get the car to my garage with calipers but I am hoping this is enough info for now. I am thinking the diameter is too small, any thoughts??Thanks, Martin
The gear in the transmission seems tight on its shaft so I don't think thats the problem and I can visually see that the gears are not meshing.
The gear in the transmission seems tight on its shaft so I don't think thats the problem and I can visually see that the gears are not meshing.
Topic Creator (OP)
Sep 1, 2014 09:36 AM
Joined 10 years ago
214 Posts
|
Forums
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster