MGExp

MG Midget Forum

Installing new top on 1970 Midget

Moss Motors
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor

phoffman Peter Hoffman
Miller Place, NY, USA   USA
I have installed new tops on MGB's but not a midget. Anything to watch out for?
The top is from Moss - Robbins.
Thanks.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
S1 Elan Kurt. Appley
Akron, Ia., USA   USA
Mark centers of the car and top at front and back and you should be OK. Crayon works well. Installation works best when the top is in the sun and nice and warm.



Kurt

pixelsmithusa Avatar
A couple good writeups on the subject in my Tech section:

http://gerardsgarage.com/Garage/Tech/topWS.htm



Gerard

http://gerardsgarage.com/


. Hide banner ads & support this website by becoming a > Gold Supporting Member <
S1 Elan Kurt. Appley
Akron, Ia., USA   USA
Read through Gerard's instructions and wanted to add that you can use an old lipstick on top of the Tenax studs [lift the dot] to transfer the correct location to your top. Just apply to the top of the stud and stretch the top over it and mark it.

Kurt

phoffman Peter Hoffman
Miller Place, NY, USA   USA
Thanks for the help. I just did a B and had to wait fora sunny day.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

To add your reply, or post your own questions




Registration is FREE and takes less than a minute!


Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster