The all-new Front Page News Feed is now live   Read the announcement
MGExp

MG Midget Forum

SPEED BLEEDERS

Moss Motors
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor

bubba1234 Avatar
bubba1234 Jim Barker
Bristol, IN, USA   USA
1977 MG Midget ~ For Sale ! ~
Removed PDWA , gutted it and plugged the Sensor...I put Speed Bleeders on the front and they worked good... I used Mightyvac to do the back ..do they have Speed Bleeders to fit the back Drum Brakes.?..

. Hide this ad & support a small business by becoming a Gold Supporting Member
Was this post helpful or interesting?
Yes No Thank
PeterC Avatar
PeterC Platinum Member Peter Caldwell
Madison Wisconsin, USA   USA
Yes, but depends on whose brand cylinders. Beware, recent cheapies are metric.


Member Services:
Supplying New Old Stock parts for all imports. A LARGE quantity being loaded to our EBAY store stores.ebay.com/worldwideimportautoparts Rebuilding lever shock absorbers for British cars. (608) 223-9400 M-F 9-5 Central or parts@nosimport.com
Was this post helpful or interesting?
Yes No Thank
bubba1234 Avatar
bubba1234 Jim Barker
Bristol, IN, USA   USA
1977 MG Midget ~ For Sale ! ~
Thanks Pete

Was this post helpful or interesting?
Yes No Thank
Chas 906 Avatar
Chas 906 Chuck Peterson
Iron Mountain, MI, USA   USA
1961 MG Midget MkI "Little Red Rider"
Got my speed bleeders from Robert Kirk on this forum. Put one on the slave cylinder also. They do work nicely!

. Hide this ad & support a small business by becoming a Gold Supporting Member
Was this post helpful or interesting?
Yes No Thank
joseph.pokorski Joseph Pokorski
Depew, NY, USA   USA
I would like to do the same to get that pesky plunger from blocking fluid from reaching the rear brake cylinders.
What did you use to plug the opening for the sensor? Thread type and size?

Was this post helpful or interesting?
Yes No Thank
bubba1234 Avatar
bubba1234 Jim Barker
Bristol, IN, USA   USA
1977 MG Midget ~ For Sale ! ~
3/8 inch 24 thread 7 /16 long with a copper "crush" washer. When you take the guts out it will probably be like mine ..totally corroded and stuck...just yank that piston out and clean it...maybe a new "Crush" washer for that end too....mine was ok. It was VERY difficult for me to put the brake lines back in it...

Was this post helpful or interesting?
Yes No Thank
Chas 906 Avatar
Chas 906 Chuck Peterson
Iron Mountain, MI, USA   USA
1961 MG Midget MkI "Little Red Rider"
Jim, what year is your car? you should add it to your profile. Helps us a lot knowing that.

Was this post helpful or interesting?
Yes No Thank
bubba1234 Avatar
bubba1234 Jim Barker
Bristol, IN, USA   USA
1977 MG Midget ~ For Sale ! ~
Its a 1977 Midget....I thought I did that

Was this post helpful or interesting?
Yes No Thank
Chas 906 Avatar
Chas 906 Chuck Peterson
Iron Mountain, MI, USA   USA
1961 MG Midget MkI "Little Red Rider"
I didn't see the year in this thread or in your home page. PM sent.

Was this post helpful or interesting?
Yes No Thank
bubba1234 Avatar
bubba1234 Jim Barker
Bristol, IN, USA   USA
1977 MG Midget ~ For Sale ! ~
Used your E-Mail...with picture of that Bleeder

Was this post helpful or interesting?
Yes No Thank
Chas 906 Avatar
Chas 906 Chuck Peterson
Iron Mountain, MI, USA   USA
1961 MG Midget MkI "Little Red Rider"
Got it and sent a reply.

Was this post helpful or interesting?
Yes No Thank
kirks-auto Platinum Member Robert Kirk
Davenport, IA, USA   USA
I stock the original speed bleeders not the Asian made cheap rip offs. I stock all the bleeders for all LBCs including the Whitworth threaded for T Midgets.



Regards,
Robert Kirk

kirkbrit@yahoo.com
E-mail PLEASE for quote/questions/orders

Business phone 563 323 1017

http://kirks-auto.com/
Moss distributor/UK importer
Beat or match most retail/delivered quote



Edited 1 time(s). Last edit at 2019-03-11 11:24 AM by kirks-auto.


Member Services:
Parts for your classic British and Italian car. 30 years in business.
Was this post helpful or interesting?
Yes No Thank
bubba1234 Avatar
bubba1234 Jim Barker
Bristol, IN, USA   USA
1977 MG Midget ~ For Sale ! ~
[/Yes..thats what one of the guy's on the Forum said...thanks..Jim are you ready to send them ?

Was this post helpful or interesting?
Yes No Thank
. Hide this ad & support a small business by becoming a Gold Supporting Member

To add your reply, or post your own questions




Registration is FREE and takes less than a minute!


Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster