Rideskinz (Tony Jennes) custom valance : Vendor & Group Buy Forum : MG Experience Forums : The MG Experience

Re: Rideskinz (Tony Jennes) custom valance #101
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: December 17, 2011 12:35PM Registered: 6 years ago Posts: 409

Only 3 more people needed for the group buy!!!

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #102
murph david m tulsa, tulsa, OK, USA 1977 MG MGB MkIII	Posted: December 17, 2011 01:37PM Registered: 1 year ago Posts: 95

Ok I want one! And the matching rear when you finish them. How big is this group now?

Edited 1 time(s). Last edit at 12/18/2011 11:08AM by murph.

Sponsored Links. You can hide this ad & support this site by upgrading to a Gold Membership ~ click here for more info.

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #103
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: December 18, 2011 12:16PM Registered: 6 years ago Posts: 409

In reply to # 1930480 by murph Ok I want one! And the matching rear when you finish them. How big is this group now?

Hey David, I'll add you to the list, thanks! Here is the group buy list as of 12/19...

1. Rick Anderson (LittleBritishCar)- interested in purchasing
2. RSS- interested in purchasing
3. Hal Lundeen (Beelicious78)-interested in purchasing
4. Tom Rawlings (trawlings)- interested in purchasing
5. Joseph T (lokepa19)- interested in purchasing w/splitter
6. David Phipps (Rallynav)- interested in purchasing w/splitter
7. Steve Michaelson (65ELCMO)- interested in purchasing
8. G.R.- interested in purchasing
9. Nickolas Taousakis (ntaousakis)- interested in purchasing
10. Mark Bates (michmark)-interested in purchasing
11. Ron Walsh (MGB65)- interested in purchasing
12. Randy Kozoris (Randyk1)- interested in purchasing
13. Joe P (RichPho)- interested in purchasing
14. David M (murph)- interested in purchasing
15. Marco Sinai (forestghost07)-interested in purchasing
16. Bruce Starke (cardocgolden)- interested in purchasing
17. Joe P (RichPho)- interested in purchasing
18. Vijay Lakshman (vijayl)- interested in purchasing
19. Michael Long (mowog70)-STRONG MAYBE!
20. Jim Nichols (260mgb)- STRONG MAYBE!
21. Wayne Sanders (29Desoto)- Maybe?
22. Mark Vaughan- Maybe?
23. Jack Austin (twigworker)- Maybe?
24. Michael Johnston (mijocan)- Maybe?

Edited 2 time(s). Last edit at 12/19/2011 01:00PM by tonyjennes.

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #104
oldsmith Michael Smith Fort Mill, SC, USA	Posted: December 18, 2011 12:26PM Registered: 1 year ago Posts: 154

Love the valance. What kind of bumper would you put on? Looks great without one!!

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #105
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: December 18, 2011 05:52PM Registered: 6 years ago Posts: 409

In reply to # 1931275 by oldsmith Love the valance. What kind of bumper would you put on? Looks great without one!!

Thanks Michael! The valance would work with both chrome and rubber bumpers. It uses the stock mounting holes, just mounts from behind instead of from the front

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #106
forestghost07 Marco Sinai Florida, USA 1972 MG MGB GT "Viajero" 1999 Chevrolet Blazer "Works For Gas"	Posted: December 18, 2011 06:07PM Registered: 2 years ago Posts: 2,337

Hey Marco! you can definitely attach the stock chrome bumper to this valance. All you would have to do is cut out the two openings for the bumper mounting brackets and you're ready to go. Can I put you on the list?
[/quote]

Hi Tony sorry took so long to get back to this - shut out the world and slaved over my GT for weeks
YES put me down!!!

Sponsored Links. You can hide this ad & support this site by upgrading to a Gold Membership ~ click here for more info.

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #107
cardocgolden Bruce Starke Golden BC, Canada	Posted: December 18, 2011 07:40PM Registered: 6 years ago Posts: 24

put me down for the front valance and the rear when it is available--prefer to ship both at the same time if possible !
thanks for this!

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #108
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: December 19, 2011 12:23AM Registered: 6 years ago Posts: 409

Thanks Marco and Bruce, I'll put you guys on the list!

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #109
vijayl Vijay Lakshman Fremont, CA, USA 1967 MG MGB GT 1979 MG MGB MkIII "Simi" 2011 Nissan Leaf "Electra"	Posted: December 19, 2011 01:51AM Registered: 2 years ago Posts: 235

Count me in for one without splitter

Sponsored Links. You can hide this ad & support this site by upgrading to a Gold Membership ~ click here for more info.

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #110
DiBiaso Ad'm DiBiaso Haverhill, MA, USA 1978 MG MGB	Posted: December 19, 2011 10:25AM Registered: 3 years ago Posts: 1,066

will these work on rubber bumper cars? if so, i would love to see photos of one installed. i am thinking that the "splitter" version would be perfect for adding some down force while not going all out for a front spoiler.

EDIT: just noticed, you already said it worked with rubber bumpers. Gotta start saving my pennies grinning smiley

Edited 1 time(s). Last edit at 12/19/2011 10:36AM by DiBiaso.

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #111
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: December 19, 2011 12:55PM Registered: 6 years ago Posts: 409

In reply to # 1931882 by vijayl Count me in for one without splitter

Thanks Vijay, you're on the list!

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #112
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: December 19, 2011 12:56PM Registered: 6 years ago Posts: 409

In reply to # 1932060 by DiBiaso will these work on rubber bumper cars? if so, i would love to see photos of one installed. i am thinking that the "splitter" version would be perfect for adding some down force while not going all out for a front spoiler.

EDIT: just noticed, you already said it worked with rubber bumpers. Gotta start saving my pennies grinning smiley

Should I add you to the list as a strong maybe or interested?

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #113
DiBiaso Ad'm DiBiaso Haverhill, MA, USA 1978 MG MGB	Posted: December 19, 2011 01:11PM Registered: 3 years ago Posts: 1,066

In reply to # 1932241 by tonyjennes

In reply to # 1932060 by DiBiaso will these work on rubber bumper cars? if so, i would love to see photos of one installed. i am thinking that the "splitter" version would be perfect for adding some down force while not going all out for a front spoiler.

EDIT: just noticed, you already said it worked with rubber bumpers. Gotta start saving my pennies grinning smiley

Should I add you to the list as a strong maybe or interested?

i wish that were the case, but there are a number of other things that need to be sorted out on the car before i can start prettying it up sad smiley

would love to see it on an RB car though, when someone else does it.

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #114
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: December 20, 2011 12:23AM Registered: 6 years ago Posts: 409

In reply to # 1932264 by DiBiaso

In reply to # 1932241 by tonyjennes

In reply to # 1932060 by DiBiaso will these work on rubber bumper cars? if so, i would love to see photos of one installed. i am thinking that the "splitter" version would be perfect for adding some down force while not going all out for a front spoiler.

EDIT: just noticed, you already said it worked with rubber bumpers. Gotta start saving my pennies grinning smiley

Should I add you to the list as a strong maybe or interested?

i wish that were the case, but there are a number of other things that need to be sorted out on the car before i can start prettying it up sad smiley

would love to see it on an RB car though, when someone else does it.

No prob, I'll definitely post up some pics of the valance on a RB car when I can

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #115
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: December 25, 2011 11:43PM Registered: 6 years ago Posts: 409

Updated list as of 12/24

1. Rick Anderson (LittleBritishCar)- interested in purchasing
2. RSS- interested in purchasing
3. Hal Lundeen (Beelicious78)-interested in purchasing
4. Tom Rawlings (trawlings)- interested in purchasing
5. Joseph T (lokepa19)- interested in purchasing w/splitter
6. David Phipps (Rallynav)- interested in purchasing w/splitter
7. Steve Michaelson (65ELCMO)- interested in purchasing
8. G.R.- interested in purchasing
9. Nickolas Taousakis (ntaousakis)- interested in purchasing
10. Mark Bates (michmark)-interested in purchasing
11. Ron Walsh (MGB65)- interested in purchasing
12. Randy Kozoris (Randyk1)- interested in purchasing
13. Joe P (RichPho)- interested in purchasing
14. David M (murph)- interested in purchasing
15. Marco Sinai (forestghost07)-interested in purchasing
16. Bruce Starke (cardocgolden)- interested in purchasing
17. Joe P (RichPho)- interested in purchasing
18. Vijay Lakshman (vijayl)- interested in purchasing
19. Steve Curtis- interested in purchasing
20. Michael Long (mowog70)-STRONG MAYBE!
21. Jim Nichols (260mgb)- STRONG MAYBE!
22. Wayne Sanders (29Desoto)- Maybe?
23. Mark Vaughan- Maybe?
24. Jack Austin (twigworker)- Maybe?
25. Michael Johnston (mijocan)- Maybe?

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #116
lokepa19 Joseph T Honolulu, HI, USA 1978 MG MGB 2008 Toyota Prius	Posted: December 30, 2011 02:31AM Registered: 4 years ago Posts: 115

Bump to the top, I want to have my valance installed already

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #117
65ELCMO Steve Michaelson Oro Valley, AZ, USA	Posted: January 06, 2012 06:42PM Registered: 1 year ago Posts: 115

Hay Tony, Where do we stand?

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #118
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: January 09, 2012 12:08PM Registered: 6 years ago Posts: 409

In reply to # 1947851 by 65ELCMO Hay Tony, Where do we stand?

Hey Steve (and everyone else),
I'm in the process of making the special injection mold for the polyurethane parts. It takes a bit of time and should be done soon. After these pieces go into production, they should be delivered within that same week. We can usually get about 10 pieces done per day. If everyone on the list could do me a favor and email me their mailing address, phone number and email address for FedEx shipping, I will send you all of the paypal information so we can get the ball rolling. My email address is tony@rideskinz.com

Thanks!
Tony

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #119
tonyjennes Tony Jennes San Juan Capistrano, CA, California, USA 1953 Nash Rambler 1969 MG MGB GT	Posted: January 14, 2012 12:43PM Registered: 6 years ago Posts: 409

I still need info from people (mailing address, phone number and email/paypal address for shipping). If there is a thumbs up by your name

, it means I have your info. Keep in mind, for this group buy to work at the discounted price, we need at least 16 people to be committed to this buy, otherwise the price goes up to $325 + $75 for shipping
(the 11-15 buyers group buy price). So lets get the ball rolling!!!

1. Rick Anderson (LittleBritishCar)- interested in purchasing

2. RSS- interested in purchasing

3. Hal Lundeen (Beelicious78)-interested in purchasing thumbs up

4. Tom Rawlings (trawlings)- interested in purchasing thumbs up

5. Joseph T (lokepa19)- interested in purchasing w/splitter thumbs up

6. David Phipps (Rallynav)- interested in purchasing w/splitter thumbs up

7. Steve Michaelson (65ELCMO)- interested in purchasing thumbs up

8. G.R.- interested in purchasing thumbs up

9. Nickolas Taousakis (ntaousakis)- interested in purchasing- thumbs up

10. Mark Bates (michmark)-interested in purchasing thumbs up

11. Ron Walsh (MGB65)- interested in purchasing thumbs up

12. Randy Kozoris (Randyk1)- interested in purchasing thumbs up

13. Joe P (RichPho)- interested in purchasing thumbs up

14. David M (murph)- interested in purchasing thumbs up

15. Marco Sinai (forestghost07)-interested in purchasing

16. Bruce Starke (cardocgolden)- interested in purchasing thumbs up

17. Vijay Lakshman (vijayl)- interested in purchasing

18. Steve Curtis- interested in purchasing thumbs up

19. Nick Jagielski- interested in purchasing thumbs up

20. Michael Long (mowog70)-STRONG MAYBE!
21. Jim Nichols (260mgb)- STRONG MAYBE!
22. Wayne Sanders (29Desoto)- Maybe?
23. Mark Vaughan- Maybe?
24. Michael Johnston (mijocan)- Maybe?

Edited 3 time(s). Last edit at 01/26/2012 11:57AM by tonyjennes.

How to advertise on this website

Rideskinz Custom Automotive Design – San Juan Capistrano, CA USA www.rideskinz.com or facebook.com/rideskinz. Check out our latest MGB/C product, the LeMans GT polyurethane rear valance: http://www.mgexperience.net/phorum/read.php?68,2295387,page=1

Reply Quote

Re: Rideskinz (Tony Jennes) custom valance #120
lokepa19 Joseph T Honolulu, HI, USA 1978 MG MGB 2008 Toyota Prius	Posted: January 23, 2012 02:48PM Registered: 4 years ago Posts: 115

BUMP to the top, lets go guys send in your info so we can have our valance already.

Reply Quote

The MG Experience

www.mgexp.com

Vendor & Group Buy Forum

Rideskinz (Tony Jennes) custom valance

Add your reply here, or post your own questions!Members Sign In if you've already registered, orRegister a New AccountRegistration is free and takes less than a minute

Join Our Club

MGExp Menu

—

Adjust Text Size

More to Explore

Add your reply here, or post your own questions!

Members Sign In if you've already registered, or
Register a New Account
Registration is free and takes less than a minute