<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/">
    <channel>
        <title>MG Experience Forums - Buy, Sell &amp; Trade Forum </title>
        <description>MG Classifieds, Used Cars (All Models), New and Used Parts, Wanted Ads (WTB), Trades</description>
        <link>http://www.mgexp.com/phorum/list.php?42</link>
        <lastBuildDate>Wed, 19 Jun 2013 05:35:36 -0500</lastBuildDate>
        <generator>Phorum 5.2.15a</generator>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396827,2396827#msg-2396827</guid>
            <title>75 MG Midget 1500 Priced to sell! [Wisconsin, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396827,2396827#msg-2396827</link>
            <description><![CDATA[ 63,812 miles, no rust or dents, a few minor scratches on finish, very good tires, uses no oil, new battery, new top, manual transmission, 4 speed, and many extras. Never driven in the winter. Maroon color. Reason for selling, too old to drive it!]]></description>
            <dc:creator>TRW</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 23:30:57 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396777,2396777#msg-2396777</guid>
            <title>Needed 1040 non-overdrive speedometer for my 67 GT [MN, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396777,2396777#msg-2396777</link>
            <description><![CDATA[ Looking to replace my non-functioning speedo. If you have a working speedometer for sale let me know.<br />
<br />
Thanks,<br />
<br />
Tom]]></description>
            <dc:creator>Woody</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Wed, 19 Jun 2013 05:21:45 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396767,2396767#msg-2396767</guid>
            <title>WTB  Overdrive switch [Georgia, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396767,2396767#msg-2396767</link>
            <description><![CDATA[ Need for 79mgb gear shift overdrive switch,can trade for parts or purchase.]]></description>
            <dc:creator>Jim Hodgkiss</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 21:44:27 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396699,2396699#msg-2396699</guid>
            <title>Original Right side sill mat and 62-67 Horn Push for sale. [Winston-Salem, N.C., USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396699,2396699#msg-2396699</link>
            <description><![CDATA[ Hello all. I have not posted much since I sold my car, but do log on here. Anyway, I have a couple of spare parts some one might be interested in. I have an original right side rubber sill mat, in black. It is in excellent condition and easier to fit as opposed to the brand new ones. I believe it came off of a GT since it has 3 small screw  holes at the outer edge of the metal trim. It would work on a roadster, you would just have to put a tiny spot of black silicone for the small holes. I am asking $20.00 plus shipping. I also have an original 62-67 horn push in great condition. It is dated 6/62. Repros are $80.00 new, so I am asking $40.00 plus shipping. If interested, you can either PM me here or email me at <a href="mailto:&#101;&#107;&#97;&#102;&#97;&#110;&#116;&#64;&#104;&#111;&#116;&#109;&#97;&#105;&#108;&#46;&#99;&#111;&#109;">&#101;&#107;&#97;&#102;&#97;&#110;&#116;&#64;&#104;&#111;&#116;&#109;&#97;&#105;&#108;&#46;&#99;&#111;&#109;</a>. Thanks.]]></description>
            <dc:creator>ekafant</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 20:23:21 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396604,2396604#msg-2396604</guid>
            <title>deleted (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396604,2396604#msg-2396604</link>
            <description><![CDATA[ deleted]]></description>
            <dc:creator>jon.wright.lbc</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 18:36:19 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396585,2396585#msg-2396585</guid>
            <title>WTB - Carpet over battery access [Beachwood, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396585,2396585#msg-2396585</link>
            <description><![CDATA[ I would like the carpet that goes over the battery access behind the seats. 1972 MGB Roadster. Black preferred.  Used, good condition preferred.<br />
<br />
If you have replaced your carpeting and have your old battery compartment carpet piece, I'm interested and will pay a reasonable price and shipping. <br />
<br />
Ours was lost and I can not find a source for a single piece of carpeting. <br />
<br />
Thanks.]]></description>
            <dc:creator>misterfox</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 18:20:55 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396110,2396110#msg-2396110</guid>
            <title>JAGAR SPEEDOMETER NEEDED FOR 1962 MG MIDGET Mk1 [Connecticut, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396110,2396110#msg-2396110</link>
            <description><![CDATA[ I am looking for a NOS or mint condition JAGAR SPEEDOMETER FOR MY 1962 MG MIDGET Mk1.<br />
<br />
Robbie<br />
203-641-8569]]></description>
            <dc:creator>AtRo Racing</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 08:49:47 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396107,2396107#msg-2396107</guid>
            <title>Flowed Alloy Heads from Peter Burgess [Truckee Hills, California, USA] (3 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396107,2396107#msg-2396107</link>
            <description><![CDATA[ <s>Just received my delivery, first lot, from Peter Burgess. I have 2 smog, and 1 not- MSX ALLOY from recent Pierce castings which have been ported and flowed by Peter Burgess to Fast Road spec and certified for SC application: certification available upon request.Also, one MSX crossflow, flowed by Peter, and a used, rebuilt, CI Peter Burgess FRBV---all here stateside on the shelf. Ready for you without delay. Vem, 775-742-1450 or Vemarooski@aol.com</s>]]></description>
            <dc:creator>vem</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Wed, 19 Jun 2013 01:02:09 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2396049,2396049#msg-2396049</guid>
            <title>wrong forum, sorry (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2396049,2396049#msg-2396049</link>
            <description><![CDATA[ My GT does not have side mirrors, and there are no holes so I presume the previous owner welded them up before painting.  Any suggestions on attaching mirrors without drilling?]]></description>
            <dc:creator>2manycars</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 10:22:40 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395876,2395876#msg-2395876</guid>
            <title>WTB 62-67 Mk1 MGB AMCO CENTER CONSOLE [Dover De., USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395876,2395876#msg-2395876</link>
            <description><![CDATA[ I have a 67 GT that I am building &amp; would love to have one.]]></description>
            <dc:creator>mgv8glen</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 22:38:46 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395802,2395802#msg-2395802</guid>
            <title>Sale pending MGB 1974 jack [ohio, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395802,2395802#msg-2395802</link>
            <description><![CDATA[ FS this is the original jack,tyre iron and bag for a 74 B but will fit all mgbs. It is in the original paint with almost no wear. The bag is included but it shows some wear after being in the boot for all these years. $90 takes it all plus shipping. Reply to <a href="mailto:&#114;&#111;&#98;&#101;&#114;&#116;&#46;&#103;&#114;&#101;&#115;&#115;&#97;&#114;&#100;&#64;&#97;&#116;&#116;&#46;&#110;&#101;&#116;">&#114;&#111;&#98;&#101;&#114;&#116;&#46;&#103;&#114;&#101;&#115;&#115;&#97;&#114;&#100;&#64;&#97;&#116;&#116;&#46;&#110;&#101;&#116;</a>  The B was used as a tradein on a BMW. Not my choice. I didn't want to give the dealership any thing from the boot.]]></description>
            <dc:creator>farmer bob</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 04:29:46 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395789,2395789#msg-2395789</guid>
            <title>Sale Pending MGB top boot cover [ohio, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395789,2395789#msg-2395789</link>
            <description><![CDATA[ FS a nice original top boot cover in black. The date on the back is 1974. There are no tears or stitching out of place. Still soft and a lot less in price than a new one. Price is $65 plus shipping. Email <a href="mailto:&#114;&#111;&#98;&#101;&#114;&#116;&#46;&#103;&#114;&#101;&#115;&#115;&#97;&#114;&#100;&#64;&#97;&#116;&#116;&#46;&#110;&#101;&#116;">&#114;&#111;&#98;&#101;&#114;&#116;&#46;&#103;&#114;&#101;&#115;&#115;&#97;&#114;&#100;&#64;&#97;&#116;&#116;&#46;&#110;&#101;&#116;</a>]]></description>
            <dc:creator>farmer bob</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 04:36:40 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395535,2395535#msg-2395535</guid>
            <title>WTB 1974 Midget Top [IL, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395535,2395535#msg-2395535</link>
            <description><![CDATA[ Hello,<br />
<br />
I am looking for a Black top for a midget that will fit a 1974 in good condition.  I am in the Great Lakes, IL area please contact me at <a href="mailto:&#76;&#83;&#119;&#97;&#105;&#110;&#49;&#56;&#64;&#97;&#111;&#108;&#46;&#99;&#111;&#109;">&#76;&#83;&#119;&#97;&#105;&#110;&#49;&#56;&#64;&#97;&#111;&#108;&#46;&#99;&#111;&#109;</a>. <br />
<br />
Thank you,<br />
Luke]]></description>
            <dc:creator>LSwain18</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 15:14:41 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395498,2395498#msg-2395498</guid>
            <title>Covers and Foams. [Fayette, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395498,2395498#msg-2395498</link>
            <description><![CDATA[ I have my original seat covers and foams if anyone is interested. The covers have some tears by the balls and the foams are relaxed. I only have one back thanks to a mouse. Have the diaphram and hooks, they are almost to shot to use. I'll send them all out for shipping. I just hate to toss anything from the old girl!B)-Thanks John.]]></description>
            <dc:creator>john1971</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 14:21:35 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395491,2395491#msg-2395491</guid>
            <title>WTB Midget 1275 Driveline seat sliders ,splash sheild [Oregon, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395491,2395491#msg-2395491</link>
            <description><![CDATA[ I have a 68 Midget 1275 with Rib Case trans <br />
<br />
Need Clean drive line or Front part into the trans<br />
Need seat sliders<br />
Missing dust caps for front end<br />
missing 2 big washer for spindles<br />
<br />
Missing splash shields LH and RH of radiator and mountings<br />
<br />
Tail lamp sets for rear old style, moss part 144-390<br />
<br />
<br />
Thanks Mike]]></description>
            <dc:creator>a1972mgbgt</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 21:05:48 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395332,2395332#msg-2395332</guid>
            <title>Deleted (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395332,2395332#msg-2395332</link>
            <description><![CDATA[ <i>Post has been removed by the administrator due to violation of the Terms of Service.</i>]]></description>
            <dc:creator>ganesh2013</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 10:37:19 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395331,2395331#msg-2395331</guid>
            <title>Deleted (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395331,2395331#msg-2395331</link>
            <description><![CDATA[ <i>Post has been removed by the administrator due to violation of the Terms of Service.</i>]]></description>
            <dc:creator>ganesh2013</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 10:36:11 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395329,2395329#msg-2395329</guid>
            <title>Deleted (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395329,2395329#msg-2395329</link>
            <description><![CDATA[ <i>Post has been removed by the administrator due to violation of the Terms of Service.</i>]]></description>
            <dc:creator>ganesh2013</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 10:34:32 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395326,2395326#msg-2395326</guid>
            <title>WTB Seat belt holders 73 GT [Abbotsford,B.C., CAN] (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395326,2395326#msg-2395326</link>
            <description><![CDATA[ As pictured but with both mounting tabs. They are for hanging kangol inertia belts in a 73 GT.<br />
John]]></description>
            <dc:creator>jewar</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 16:28:55 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395312,2395312#msg-2395312</guid>
            <title>FS: Assorted MGB Parts [IL, USA] (4 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395312,2395312#msg-2395312</link>
            <description><![CDATA[ Have many parts leftover from a 1966 and 1974 MGB projects. OK to bundle; send me a PM with your interest. <br />
<br />
Prices shown below DO NOT include shipping; let me know what you want and how you want it shipped and we'll go from there.<br />
<br />
1. Pair of SU HIF4 carbs: professionally rebuilt by The Roadster Factory/CAR Components (from 1974 B) - fits 1974 to 1974 MGB; try $400<br />
2. PCV (used - from 1966 B) and rebuild parts: new/unused (VB p/n's 2-255, 2-295 and 2-258) - fits 1964 to 1969 MGB; try $15 for everything<br />
3. Radiator: new/unused (B-Hive p/n 112-225) - fits 1968 to 1976 MGB; try $180<br />
4. Radiator Fan: used (from 1974 B) - fits 1971 to 1974 MGB; try $20<br />
5. Valve Cover: used (from 1966 B) - needs to be repainted but otherwise is complete; fits 1964 to 1970 MGB; try $40<br />
6. Pair of Chrome bullet ('ray dot') mirrors and installation hardware: used (Moss p/n 222-372) - all years; try $25 for the pair<br />
7. **ON HOLD** Air Cleaner Assembly HIF4 type: used (from 1974 B) - fits 1972 to 1974 MGB; try $25<br />
<br />
Pictures on request.]]></description>
            <dc:creator>mgat2420</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 20:39:36 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395311,2395311#msg-2395311</guid>
            <title>Spridget exhaust manifold $10 + US postage [New York, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395311,2395311#msg-2395311</link>
            <description><![CDATA[ Flange has a weld repair and one helicoil will be needed. # on part is: 1231581]]></description>
            <dc:creator>David Deutsch</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 10:08:12 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395288,2395288#msg-2395288</guid>
            <title>Dynaplastics MGB hardtop shell Pick up only $30 [New York, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395288,2395288#msg-2395288</link>
            <description><![CDATA[ I'm taking rear glass before it leaves here.]]></description>
            <dc:creator>David Deutsch</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 20:04:18 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395276,2395276#msg-2395276</guid>
            <title>bits4brits [NY, USA] (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395276,2395276#msg-2395276</link>
            <description><![CDATA[ Hello all,<br />
  I'm interested in getting his fuse box/relay set for my '73 b, does anyone know when he'll be back online?  (I'm pretty sure he's a member here, correct?)<br />
m.]]></description>
            <dc:creator>pemgb</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 21:29:13 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395250,2395250#msg-2395250</guid>
            <title>Early MGB battery box covers $10 each + US POSTAGE [New York, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395250,2395250#msg-2395250</link>
            <description><![CDATA[ Two available.<br />
PayPal works best]]></description>
            <dc:creator>David Deutsch</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 08:29:16 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395247,2395247#msg-2395247</guid>
            <title>Spriget hub stuff ALL for $20 INCLUDING US POSTAGE [New York, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395247,2395247#msg-2395247</link>
            <description><![CDATA[ PayPal works best]]></description>
            <dc:creator>David Deutsch</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 08:26:34 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395230,2395230#msg-2395230</guid>
            <title>MGB seat belt $16 INCLUDES US postage [New York, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395230,2395230#msg-2395230</link>
            <description><![CDATA[ Needs new strapping but works well]]></description>
            <dc:creator>David Deutsch</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 08:12:17 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395220,2395220#msg-2395220</guid>
            <title>MGB knock off nuts $4 each + US POSTAGE [New York, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395220,2395220#msg-2395220</link>
            <description><![CDATA[ they will fit in a small flat rate box so you can have one for $10 Including postage OR both for $14 including postage]]></description>
            <dc:creator>David Deutsch</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 08:00:48 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395200,2395200#msg-2395200</guid>
            <title>Wtb amco center console [Missouri, USA] (3 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395200,2395200#msg-2395200</link>
            <description><![CDATA[ I doubt it, but does anybody have one of these they would consider parting with?]]></description>
            <dc:creator>jon.wright.lbc</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Wed, 19 Jun 2013 04:35:14 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2395163,2395163#msg-2395163</guid>
            <title>Wire wheel set [MA, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2395163,2395163#msg-2395163</link>
            <description><![CDATA[ I have a set of 5 wire wheels from a tr4 that will fit an MGA. They are much stronger (more spokes) and safer than the original MGA wheels.  $250.00 plus shipping. Also misc. MGA parts, 1 door, 1 battery cover panel, 1 steel wheel. A few bumper parts and hub caps as well.]]></description>
            <dc:creator>StevenH</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 20:40:12 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394958,2394958#msg-2394958</guid>
            <title>WTB Minilites / Panasports Midget or Bugyee [Huntingburg, IN, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394958,2394958#msg-2394958</link>
            <description><![CDATA[ As the title reads looking for a set of Minilites or Panasports to fit a 58 Bugeye.<br />
<br />
Thanks]]></description>
            <dc:creator>doxendine</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 05:12:15 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394591,2394591#msg-2394591</guid>
            <title>WTB Radio Antenna '76 MGB [Delaware, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394591,2394591#msg-2394591</link>
            <description><![CDATA[ The radio antenna just busted off. It's been surprisingly hard to find one that would work. Any guidance would be greatly appreciated!]]></description>
            <dc:creator>HickoryBranch247</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sun, 16 Jun 2013 12:56:18 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394375,2394375#msg-2394375</guid>
            <title>Austin America Grill $75 + US postage [New York, USA] (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394375,2394375#msg-2394375</link>
            <description><![CDATA[ Excellent man cave wall hanging or would clean up and look good on a driver.]]></description>
            <dc:creator>David Deutsch</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 04:30:05 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394366,2394366#msg-2394366</guid>
            <title>MGB luggage rack $50 + US POSTAGE [New York, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394366,2394366#msg-2394366</link>
            <description><![CDATA[ No show piece but functional <br />
<br />
Local pick up welcomed]]></description>
            <dc:creator>David Deutsch</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sun, 16 Jun 2013 07:22:30 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394282,2394282#msg-2394282</guid>
            <title>vintage kyosho mgb body kit for sale [or, USA] (3 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394282,2394282#msg-2394282</link>
            <description><![CDATA[ selling a really cool vintage mgb kyosho rc car body,  possibly a chassis for it if interested,  will sell body alone with box and all the parts still in original packaging,  box and body for 200...  with the nitro power chassis minus electronics and minus controller for 375,   look them up on ebay,   kyosho nostalgic series  Mgb Mk1 <br />
if anyone is interested in this please send me a message here on the site and i'll get you a picture.<br />
<br />
also have a set of su's off the 64 b I got rid of, extra windshield, and rollbar.  wire loom for 64 b, wire loom for 77 midget,  mahogany mg shifter knob, midget rubber bumper stock carb.  a few other bits I will see what I have tommorrow]]></description>
            <dc:creator>2mgmidgets</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 07:03:02 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394218,2394218#msg-2394218</guid>
            <title>Wix 51300 cartridge filter-free [CA, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394218,2394218#msg-2394218</link>
            <description><![CDATA[ I have a brand new Wix #51300 cartridge oil filter. You can have it. But it would probably cost more to mail it than to buy one locally, so offer's limited to pickup only. I'm in northern East Bay of San Francisco, halfway to Sacramento along I-80. And you can make a trip in your B to pick it up. <br />
<br />
I do not know what year it fits. I bought it by mistake several years ago. I'm going to toss it out in a couple weeks if nobody wants it...subject to conditions above (no mailing).]]></description>
            <dc:creator>mac townsend</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 22:02:08 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394178,2394178#msg-2394178</guid>
            <title>SOLD  MGF literature/brochure collection [Moorestown, NJ, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394178,2394178#msg-2394178</link>
            <description><![CDATA[ I have a large collection of MGF literature, sales brochures, magazine articles mostly from when it was introduced back in 1995.<br />
1995 and 2001 sales brochures, full color along with supplemental accessories catalogs.  April and March Autocar magazine MGF road test articles along with developmental information.  Official reprint of CAR magazine article presented as a sales brochure.<br />
1995 Geneva Motor Show 16 page color MGF guide.  <br />
Loads of color pictures, information and stats.<br />
$50. plus shipping<br />
Pete]]></description>
            <dc:creator>Motorcar Garage</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 07:30:55 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394038,2394038#msg-2394038</guid>
            <title>Deleted (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394038,2394038#msg-2394038</link>
            <description><![CDATA[ <i>Post has been removed by the administrator due to violation of the Terms of Service.</i>]]></description>
            <dc:creator>Gemini Seat Covers</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 17:24:33 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394008,2394008#msg-2394008</guid>
            <title>WTB 25D4 Distributor for 71 BGT [San Pedro, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394008,2394008#msg-2394008</link>
            <description><![CDATA[ Needs to have working Vacuum Advance not retard and Preferably with code 41288 But any will work.]]></description>
            <dc:creator>xMrMarks</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 21:31:34 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394006,2394006#msg-2394006</guid>
            <title>UK-Made Spin On Oil Filters [Crystal Lake, IL, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394006,2394006#msg-2394006</link>
            <description><![CDATA[ Have: two (2) GUD/Coopers #Z25; and one (1) Lucas F6499 Spin-on Oil Filters.  $6.00 each, plus postage]]></description>
            <dc:creator>joaniebo</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 16:28:05 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394004,2394004#msg-2394004</guid>
            <title>Summit High Pressure Fuel Pump [Alabama, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394004,2394004#msg-2394004</link>
            <description><![CDATA[ I have a Summit Racing® High-Flow Electric Fuel Pump, part number SUM-G3138 that I had on the car running for 2 hours. I don't need this much pressure so I replaced it.<br />
   I will let it go for $65.00 and ship it free anywhere in the cont. USA<br />
<br />
  Pump has the mounts with it.<br />
<br />
Steve]]></description>
            <dc:creator>smartin436</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 16:24:10 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2394002,2394002#msg-2394002</guid>
            <title>UK-Made Felt Oil Filter [Crystal Lake, IL, USA] (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2394002,2394002#msg-2394002</link>
            <description><![CDATA[ Have one (1) Lucas #2833 available - $9.00 plus postage.]]></description>
            <dc:creator>joaniebo</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 22:25:15 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393997,2393997#msg-2393997</guid>
            <title>UK-Made GUD / Coopers/ Lucas Paper Oil Filters [Crystal Lake, IL, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393997,2393997#msg-2393997</link>
            <description><![CDATA[ Have:  one (1) GUD/Coopers #G714, three Lucas #F4645; and two (2) Wipac #OF351 Paper oil Filter cartridges -$7.00each ;   Plus postage.]]></description>
            <dc:creator>joaniebo</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 16:20:57 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393886,2393886#msg-2393886</guid>
            <title>Craigslist 440 Jensen interceptor Wow [Fla, USA] (5 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393886,2393886#msg-2393886</link>
            <description><![CDATA[ Deland, Fl<br />
<br />
Jun 10 Jensen Intercepter Mark III$4900 (Deland) pic]]></description>
            <dc:creator>mimssandi</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 18 Jun 2013 00:36:28 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393860,2393860#msg-2393860</guid>
            <title>Lockheed Repair Kits [Crystal Lake, IL, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393860,2393860#msg-2393860</link>
            <description><![CDATA[ Gotta get rid of some of this stuff that I've gathered for MGBs that I don't even own.  Found the following Lockheed repair kits that are marked with Lockheed and Moss part numbers, as follows:<br />
<br />
180-475 - have 2@ of these<br />
Lockheed nos. LK10539 (LSSB539)<br />
MGB/C BRAKE REPAIR KIT (.800&quot; bore size)<br />
all RD, GT to (c)138400<br />
$5.85- Moss Price@<br />
<br />
180-985 - have 3@ of these<br />
Lockheed nos. LK10960 (LSSB960)<br />
MGB/C CLUTCH  REPAIR KIT, master cylinder,<br />
cylinders with ring type seals<br />
$8.40 - Moss Price @<br />
<br />
Above applications and prices taken from Moss web site. Will ship all 5 kits for $20.00 plus postage. Thanks.<br />
<br />
Bob]]></description>
            <dc:creator>joaniebo</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 13:58:25 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393849,2393849#msg-2393849</guid>
            <title>MG Midget MK III Fiberglass Hardtop [WA, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393849,2393849#msg-2393849</link>
            <description><![CDATA[ This is a MG fiberglass hardtop made by Custom Hardtops out of Long Beach CA. It came with my 71 but I believe this will fit 1967 through 1980 Midgets. It is in excellent condition, I cannot find any damage to the fiberglass and the back glass looks great. The door and front seals are very nice as is the glass seal in the rear window. The latches are good and I have the main hold down parts. The rear deck area seal is missing, I am sure some aftermarket extruded seal will work fine. $750 cash only. Local pickup only, Bellingham WA 360-734-4648<br />
<br />
Thanks]]></description>
            <dc:creator>Car Go</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 13:39:09 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393840,2393840#msg-2393840</guid>
            <title>wheels and door cards  [Springfield MO, USA] (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393840,2393840#msg-2393840</link>
            <description><![CDATA[ I have a set of wheel from my 79 mgb and the spare  for sale cheep   the tires are weather cracked . located in sw Missouri make offer <br />
I also have the door cards tops and pull handles with the speakers free to anyone that wants to pick them up <br />
<br />
John  4178403738]]></description>
            <dc:creator>jtlaw1</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sun, 16 Jun 2013 03:22:11 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393757,2393757#msg-2393757</guid>
            <title>Tonneau cover 1971 with Kangol cutouts [Abbotsford,B.C., CAN] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393757,2393757#msg-2393757</link>
            <description><![CDATA[ I was going to use on my car, but have retractable seatbelts. I test fit it when it was hot and after sitting in the sun, it fit. It was tight,not going to say that you won't need a extender but you might not. Zipper is good , does have some staining but overall looks pretty good and reasonably clean for a used tonneau.<br />
It is original style. Will ship to Canada or US. Price $80 shipping extra.<br />
John]]></description>
            <dc:creator>jewar</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 15:15:37 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393753,2393753#msg-2393753</guid>
            <title>Steering wheel 14&amp;quot; Leather Mountney 72-76 [Abbotsford,B.C., CAN] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393753,2393753#msg-2393753</link>
            <description><![CDATA[ Bought a 14&quot; Mountney wheel without hub and found it not to fit my Tourist Trophy hub, bought a hub from England. In the meantime found a Tourist trophy wheel to fit my hub. Hub has only been test fit to make sure it fits spline, wheel is excellent. $120 shipped US or Canada.Note: Mountney site describes hub as fitting 72-76, Moss hubs fit 70-76 not sure why it doesn't list 70 up.<br />
John]]></description>
            <dc:creator>jewar</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 15:16:23 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393620,2393620#msg-2393620</guid>
            <title>WTB 7 blade fan for 1976 [, USA] (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393620,2393620#msg-2393620</link>
            <description><![CDATA[ I am looking for a good plastic fan for my mgb.<br />
Thank you]]></description>
            <dc:creator>flameout</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 10:45:13 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393533,2393533#msg-2393533</guid>
            <title>***SOLD*** MOSS TOURIST TROPHY POLISHED STAINLESS STEEL EXHAUST SYSTEM [DC, USA] (12 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393533,2393533#msg-2393533</link>
            <description><![CDATA[ Complete Moss (459-085) TT polished stainless steel exhaust system for 63 – 74.5 MGB. Includes header, hangers and all hardware. Excellent condition, ready to bolt on. $200.<br />
<br />
thanks to all but sold locally.]]></description>
            <dc:creator>73BGTDC</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 18:49:16 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393436,2393436#msg-2393436</guid>
            <title>WTB 1980 MGB Crankshaft Pulley [Buffalo, NY, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393436,2393436#msg-2393436</link>
            <description><![CDATA[ My crankshaft pulley is cracked and I believe it is causing engine vibration. I would like to buy a used one (not fully invested in this car yet) that is in good, usable condition. I need the whole deal, pulley, harmonic balancer, etc. Rubber should be in decent condition as well.<br />
<br />
Let me know, thanks.]]></description>
            <dc:creator>AGlass0fMilk</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 07:00:52 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393277,2393277#msg-2393277</guid>
            <title>(tu)FS - Chrome Bumpers, Spridget [Minnesota, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393277,2393277#msg-2393277</link>
            <description><![CDATA[ Front and rear bumpers from my 66 Sprite. <br />
<br />
These are 47 years old but are good daily driver bumpers. No rust, some small dings and one dent.  <br />
<br />
$70 each, plus shipping cost. Thanks for looking.<br />
<br />
More photos here<br />
<a href="http://s534.photobucket.com/user/Boze_photo/library/66%20Spridget%20bumpers" target="_blank" rel="nofollow" >http://s534.photobucket.com/user/Boze_photo/library/66%20Spridget%20bumpers</a>]]></description>
            <dc:creator>Boze</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 19:52:31 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393253,2393253#msg-2393253</guid>
            <title>Got one! Thanks.. used gearshift knob for 78 &amp;quot;B&amp;quot; [Pikeville,Tenn, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393253,2393253#msg-2393253</link>
            <description><![CDATA[ I need a good used gearshift knob for my 78 mgb that isn't too expensive,but still looks pretty good.......Frank]]></description>
            <dc:creator>F.Blackstone</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 10:24:57 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393225,2393225#msg-2393225</guid>
            <title>MGB Parts Car - $800 Newark, DE [Newark, USA] (18 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393225,2393225#msg-2393225</link>
            <description><![CDATA[ Hi all,<br />
<br />
I've had my mgb up for sale for quite some time. I wasn't super serious about selling it because everyone who was interested was so far away. Anyways I had a guy who promised that he wanted it, but asked me to drive the car to my local DMV to get the title transferred to my name. He wanted me to do this today and he come pick it up, which put me in a rush, but he promised cash. Anyways my DMV is 25 miles each way, and about on mile 45 of my trip I heard a spurt. Uh oh. I limped it home and realized that my temp gauge had went bad and I was severely overheating. Unfortunately this blew a head gasket (which I found out later, after doing a compression test on #1 cylinder and getting no compression, but oil on my spark plug). Anyways I just drove this car 50 miles round trip and it ran flawlessly until this happened. Even though the buyer and I had an agreement, he bailed and didn't pay his &quot;guaranteed percentage&quot; that he promised in writing. So now I have a broken down MGB with a free and clear title, a brand new $200 optima battery, almost $300 in brand new carpets, 90% of a chrome bumper conversion, and many other things for sale. I am beyond upset with the situation and at the dishonesty of the buyer, however I suppose it's a good thing this happened to me and not another potential buyer down the line. So I am selling EVERYTHING for $800. Before the head gasket, I had it up for sale for $2000 and people were calling it a steal (see link below). Here's the only catch:<br />
<br />
I am leaving tomorrow for orlando florida for the week. I will sign the title before I leave, so my dad can sell it to anyone here. But you must get here with a trailer and pick it up before I get back or I'm scrapping it for probably $200. So please come get this great project that is probably worth much more than I'm asking as a parts car, or fix the head gasket and do an engine rebuild and drive it around! I'd much rather sell it to someone here, but I am going to medical school next year and didn't have the money or time to deal with it BEFORE this happened, so now I'm really tapped out. Thanks very much and have a wonderful day.<br />
<br />
previous link:<br />
<a href="http://www.mgexp.com/phorum/read.php?42,2364194,2379039#msg-2379039" target="_blank" rel="nofollow" >http://www.mgexp.com/phorum/read.php?42,2364194,2379039#msg-2379039</a>]]></description>
            <dc:creator>freebird92</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 17 Jun 2013 09:00:35 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393222,2393222#msg-2393222</guid>
            <title>FS: Rheostat,Trunk Lock [port ewen, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393222,2393222#msg-2393222</link>
            <description><![CDATA[ I have these parts that came off my 74 BGT.  The radio works and is AM/FM vintage Clarion monaural aftermarket. The  panel light rheostat does work and fits 72-76 . The trunk lock with key fits all years. The radio needs a knob, the trunk lock has some normal chrome blemish being 40 years old. Your choice $22 each,plus shipping. Thanks, Dale.                                      The radio is sold.  Thanks, Dale]]></description>
            <dc:creator>dales72mgbgt</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 18:07:54 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393181,2393181#msg-2393181</guid>
            <title>smoothcase transmission wanted [, USA] (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393181,2393181#msg-2393181</link>
            <description><![CDATA[ Looking for a redone or known quality smoothcase transmission <br />
<br />
Going into a 1962 Sprite<br />
<br />
I only want to do this job once ..hopefully<br />
<br />
Appreciate any and all leads<br />
<br />
Thanks in advance<br />
<br />
Alan<br />
<br />
<a href="mailto:&#102;&#114;&#111;&#103;&#101;&#121;&#101;&#64;&#99;&#111;&#120;&#46;&#110;&#101;&#116;">&#102;&#114;&#111;&#103;&#101;&#121;&#101;&#64;&#99;&#111;&#120;&#46;&#110;&#101;&#116;</a>]]></description>
            <dc:creator>frogeye</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sun, 16 Jun 2013 21:29:33 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2393049,2393049#msg-2393049</guid>
            <title>WTB - 14&amp;quot; - Splined Alloy Wheels [Crystal Lake, IL, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2393049,2393049#msg-2393049</link>
            <description><![CDATA[ Time to get new tires for the 68 MGB and have decided to get rid of the wire wheels / tube-type tires and get 5 new splined / knock-off alloy wheels.  Would appreciate any assistance / referrals where would be the best place to get them. THANKS.<br />
<br />
Bob<br />
<br />
PS - Also have 4 powder coated 14&quot; wheels that I bought awhile back from from a fellow on MGE - will never use them should anyone be interested.]]></description>
            <dc:creator>joaniebo</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 17:33:23 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392872,2392872#msg-2392872</guid>
            <title>Magazines [North Haledon NJ, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392872,2392872#msg-2392872</link>
            <description><![CDATA[ I inherited a bunch of magazines. Was going to offer them out in groups but its too expensive to mail out so if anyone is within striking distance of where I live (north New Jersey ) they can have them for free<br />
Safety Fast 1999 through 2001<br />
Practical Classics - most of 1998,1999,2000 &amp; 1995<br />
Enjoying MG 2000<br />
MG World 2000/2001<br />
MG Enthusiast 1999]]></description>
            <dc:creator>Fydell</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 10:50:30 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392828,2392828#msg-2392828</guid>
            <title>MGB GT window trim [North Adams, MI, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392828,2392828#msg-2392828</link>
            <description><![CDATA[ I have window trim for a 1971 mgb gt.  I also have side windows and motor plus trans.Trim is free of dents or dings. If you are interested please private message me and I can send pic to you email. Thanks!]]></description>
            <dc:creator>Gunit</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 13:43:01 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392789,2392789#msg-2392789</guid>
            <title>Best Automotive Grade Epoxy [Maryland, USA] (6 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392789,2392789#msg-2392789</link>
            <description><![CDATA[ I haven't been able to find anything searching the site. What is the best automotive grade epoxy? Looking for something better than J-B Weld. I'm trying to avoid drilling holes in my 69 MGB and I want to mount a bracket in the trunk for the fire extinguisher, plus a small tool box. I've done this on other cars and have used J-B Weld and it worked fine for a while but eventually broke. We had some stuff in the Navy when I was in about 30 years ago that we used to epoxy antennas to Marine Corps Amphibious vehicles, but I'm unable to find the commerical equivalent. An ideas?<br />
Thanks;<br />
Chuck]]></description>
            <dc:creator>ChuckoldNavy53</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 11:40:33 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392674,2392674#msg-2392674</guid>
            <title>WTB - Rebuildable Weber DGV 32/36 Carb [Huntsville,AL, USA] [Huntsville,AL, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392674,2392674#msg-2392674</link>
            <description><![CDATA[ I am just looking for an old Weber DGV 32/36 carburetor with manual choke to tinker with.  Anyone have one they don't need any longer?  Send me a PM.<br />
Thanks,<br />
   John T.]]></description>
            <dc:creator>JohnT</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 10:09:47 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392531,2392531#msg-2392531</guid>
            <title>Rostyle Rims for my 1978 Midget [Ontario, CAN] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392531,2392531#msg-2392531</link>
            <description><![CDATA[ Hi everyone,<br />
<br />
I recently purchased a 1978 MG Midget and the only thing that the previous owner changed was the rims. <br />
I live in Toronto Ontario and would love to get my hands on some OEM clean rims for my car!<br />
<br />
Being in Toronto, I realize that shipping will be an absolute pain in the butt, however I am 100% trustworthy and honest (even though I am a new member with few posts)<br />
<br />
I posted a pic of my car below.<br />
<br />
Thanks and I look forward to tracking these down!!!]]></description>
            <dc:creator>Jon1978MG</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 21:36:22 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392505,2392505#msg-2392505</guid>
            <title>Complete custom 1971 MGBGT Interior with leather bucket seats - Trade for '65 Roadster interior [Mill Valley, Ca, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392505,2392505#msg-2392505</link>
            <description><![CDATA[ Have one of these...but for a 1971 GT<br />
<br />
<a href="http://www.ebay.com/itm/MGA-1500-1600-Twin-Cam-Rallye-Interior-New-Black-w-blk-/250930178219?pt=Vintage_Car_Truck_Parts_Accessories&amp;vxp=mtr&amp;hash=item3a6c9aa8ab" target="_blank" rel="nofollow" >http://www.ebay.com/itm/MGA-1500-1600-Twin-Cam-Rallye-Interior-New-Black-w-blk-/250930178219?pt=Vintage_Car_Truck_Parts_Accessories&amp;vxp=mtr&amp;hash=item3a6c9aa8ab</a><br />
<br />
brand new leather faced bucket seats, doe skin tan, pictures to follow. All new carpets, re-covered moldings, recovered rear seat. <br />
<br />
Shame to trash half of it cause I am doing a roadster...in a perfect world, someone would just buy me the same thing for a roadster and I would send them the complete GT set up....the GT set up is over 2 grand excluding shipping...]]></description>
            <dc:creator>blauvelt</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 20:44:54 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392407,2392407#msg-2392407</guid>
            <title>MGB GT Rain gutters &amp;amp; side window trim [Lower Mainland BC, CAN] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392407,2392407#msg-2392407</link>
            <description><![CDATA[ I have this trim for sale $140.00 or what ever you think it may be worth to you? Make a offer. <br />
<br />
Lots of photos on my Cs List ad.<br />
<br />
<a href="http://vancouver.en.craigslist.ca/pml/pts/3868637032.html" target="_blank" rel="nofollow" >http://vancouver.en.craigslist.ca/pml/pts/3868637032.html</a>]]></description>
            <dc:creator>PaulM</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 18:25:42 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392405,2392405#msg-2392405</guid>
            <title>MGB GT Front windscreen trim [Lower Mainland BC, CAN] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392405,2392405#msg-2392405</link>
            <description><![CDATA[ Cheap at 60.00 the top piece has a little ding on it's lower edge.<br />
<br />
See photos on Cs list below<br />
<br />
<br />
<br />
<a href="http://vancouver.en.craigslist.ca/pml/pts/3868591993.html" target="_blank" rel="nofollow" >http://vancouver.en.craigslist.ca/pml/pts/3868591993.html</a>]]></description>
            <dc:creator>PaulM</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 18:21:45 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392403,2392403#msg-2392403</guid>
            <title>Air filter Snorkel for air filter housing (Smog Cars) [Lower Mainland BC, CAN] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392403,2392403#msg-2392403</link>
            <description><![CDATA[ 20.00 bucks or ??  They are getting pretty rare and N/A<br />
<br />
<a href="http://vancouver.en.craigslist.ca/pml/pts/3868789723.html" target="_blank" rel="nofollow" >http://vancouver.en.craigslist.ca/pml/pts/3868789723.html</a>]]></description>
            <dc:creator>PaulM</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 18:19:16 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2392396,2392396#msg-2392396</guid>
            <title>PCV valve and mounting Bracket [Lower Mainland BC, CAN] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2392396,2392396#msg-2392396</link>
            <description><![CDATA[ reduced to 25.00<br />
<br />
<a href="http://vancouver.en.craigslist.ca/pml/pts/3843467056.html" target="_blank" rel="nofollow" >http://vancouver.en.craigslist.ca/pml/pts/3843467056.html</a>]]></description>
            <dc:creator>PaulM</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 18:12:42 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391934,2391934#msg-2391934</guid>
            <title>Fuel tank for MG midget 1975 -76  Kent Ohio [Ohio, USA] (3 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391934,2391934#msg-2391934</link>
            <description><![CDATA[ Thought the fuel tank on my Midget would work out ,and it did for a while but now rust has fouled the in tank filter and the fuel line. Looking for a rust free tank.:S JM Kent Ohio]]></description>
            <dc:creator>jamesm5858</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sun, 16 Jun 2013 11:06:26 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391853,2391853#msg-2391853</guid>
            <title>FS MGB Air Cleaner 75 &amp;amp; Up [Florida, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391853,2391853#msg-2391853</link>
            <description><![CDATA[ Nice clean set up with fairly new filter $50. plus USPS shipping.]]></description>
            <dc:creator>Pineridge5342</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 06:11:15 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391846,2391846#msg-2391846</guid>
            <title>77 mgb tachometer [Kansas, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391846,2391846#msg-2391846</link>
            <description><![CDATA[ Hello I'm looking to purchase a good used tachometer for my 77 mgb. Does anyone have one they are willing to sell?]]></description>
            <dc:creator>cusso111</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 12:04:31 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391731,2391731#msg-2391731</guid>
            <title>WTB - Late model used engine-PNW area [Outside Otis, OR - in the woods!, USA] (7 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391731,2391731#msg-2391731</link>
            <description><![CDATA[ Have cash, can travel within reason. <br />
<br />
OK guys and dolls...this is for the car I'm trying to save from the scrap heap.  I promise I am not out to make a ton of money on this.  Little Red has a very nice body, and shouldn't be relegated to the parts bin.  Help me save it!<br />
<br />
I need a five main, long block engine.  Something that won't break the bank to make workable.  You know what I'm after.  I don't mind a refresh, but not a rebuild.  I can't see it selling for cost with a rebuilt engine.<br />
<br />
I've got all the ancillaries, alternator, carb, etc.  Need an engine.  Rod H. came down and put the kiss of death on the old engine.  Too many deep cracks between the 3 and 4 cylinders.<br />
<br />
Whatcha got out there?  Be nice, I really just think this is too nice to part out.<br />
<br />
If you're serious about these cars, you know what I mean here.  (:D]]></description>
            <dc:creator>29desoto</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 09:42:00 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391675,2391675#msg-2391675</guid>
            <title>MGB Valve covers (OEM) [Cypress, TX, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391675,2391675#msg-2391675</link>
            <description><![CDATA[ I have two - not sure of the years but one is black &amp; one is red...  $10 + shipping each.]]></description>
            <dc:creator>rficalora</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 06:34:51 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391660,2391660#msg-2391660</guid>
            <title>SOLD Center console - 76 MGB [Cypress, TX, USA] (6 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391660,2391660#msg-2391660</link>
            <description><![CDATA[ I've built a custom center console for my car so have this one available.  This is just the armrest/shifter piece; not the radio console as that piece is gone already.  <br />
<br />
Moss gets $90 for the arm rest/shifter piece; how about $30 (+ actual shipping)?  Note, it does not have the ash tray (which Moss does not include either).]]></description>
            <dc:creator>rficalora</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 22:14:13 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391641,2391641#msg-2391641</guid>
            <title>SOLD For the engine swap folks... Buick portals [Cypress, TX, USA] (9 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391641,2391641#msg-2391641</link>
            <description><![CDATA[ I have a set of 8 Buick portals (actually 8 good ones plus a spare that's a little pitted) that I was going to use on my car but ended up not using them.  Pretty sure they came off of a '61 Electra 225.  $50 + actual shipping (easily will fit in a medium size USPS flat rate box so max would be $11 for shipping).<br />
<br />
A couple of cars that show what these look like on an MGB are shown as well.  One is Don Allen's built by Ted Lathrop &amp; the other is Richard Peterson's recently posted here:  <a href="http://www.mgexp.com/phorum/read.php?40,2390298" target="_blank" rel="nofollow" >http://www.mgexp.com/phorum/read.php?40,2390298</a>]]></description>
            <dc:creator>rficalora</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 19:41:48 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391401,2391401#msg-2391401</guid>
            <title>WTB used tonneau cover for 1978 MGB [Virginia, USA] (3 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391401,2391401#msg-2391401</link>
            <description><![CDATA[ WTB tonneau cover for 1978 MGB, just the part that covers the top in the back, dont need the full tonneau cover.Anyone have one for sale?]]></description>
            <dc:creator>Bobadeba</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 13:34:15 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391313,2391313#msg-2391313</guid>
            <title>2 day sale 1978 MGB new paint, carb, tires [Fla, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391313,2391313#msg-2391313</link>
            <description><![CDATA[ Can't get pictures off my new phone. Will have to go take some more. Good daily driver, looks sharp. Goes to dealer for consignment in several days. $4500. Recent tune, drives nicely.]]></description>
            <dc:creator>mimssandi</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Wed, 12 Jun 2013 12:07:15 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391299,2391299#msg-2391299</guid>
            <title>N 60R Champion race plugs [Fla, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391299,2391299#msg-2391299</link>
            <description><![CDATA[ I only have 18 of these, brand new, aged in the wrappers. $4.00 each. Shipping will be by parcel post 2 day if it fits box.]]></description>
            <dc:creator>mimssandi</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Wed, 12 Jun 2013 11:18:26 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2391110,2391110#msg-2391110</guid>
            <title>Tom's Knob for sale on eBay (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2391110,2391110#msg-2391110</link>
            <description><![CDATA[ If anyone is in need of a replacement, one for sale ... <a href="http://www.ebay.com/itm/MG-MGB-FACTORY-ORIGINAL-HEATER-DRAIN-TUBE-W-VALVE-NLA-/360673220068?pt=Vintage_Car_Truck_Parts_Accessories&amp;hash=item53f9cc95e4&amp;vxp=mtr" target="_blank" rel="nofollow" >Tom's Knob on eBay</a>]]></description>
            <dc:creator>Talon884</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Fri, 14 Jun 2013 10:29:01 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390989,2390989#msg-2390989</guid>
            <title>Sold (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390989,2390989#msg-2390989</link>
            <description><![CDATA[ Sold]]></description>
            <dc:creator>MCARD</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 22:35:49 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390889,2390889#msg-2390889</guid>
            <title>Cleaning out the garage, 14 CUX, Rostyle Wheels, MGB Boot lid [Alabama, USA] (9 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390889,2390889#msg-2390889</link>
            <description><![CDATA[ Hi All,<br />
  Need to make room in garage, make offer...sell or trade for????<br />
1. 14CUX system, ECU, Harness, all sensors, intake plenum, some parts I have 2 of...air cleaner...etc..............It was on a running car 6 months ago. I also have a plenum that has been machined down .750in for hood room...<br />
<br />
2. 4 Rostyle wheels with 90% tires on them, trim rings and center caps too..<br />
<br />
3. 1 Boot lid, it has the dreaded prop rod kink....<br />
<br />
Can ship items.................Make Offer!!!!<br />
<br />
Located in Mobile Alabama............]]></description>
            <dc:creator>smartin436</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 09:59:12 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390734,2390734#msg-2390734</guid>
            <title>300hp Buick 215 [About 12 miles from Sears Point, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390734,2390734#msg-2390734</link>
            <description><![CDATA[ I have a mechanic friend that has a fully built 215 sitting in his shop.  All the goodies: 327 rods, aluminum flywheel Offy manifold...  Over 300hp.  He put less than 1000 miles on it in his Apollo and then put an LS1 in instead.  He wants $4k.  I have no idea what these are worth but I told him I'd let the MGB crowd know.  Basil 707.762.0974  <a href="mailto:&#98;&#97;&#115;&#105;&#108;&#97;&#100;&#97;&#109;&#115;&#64;&#121;&#97;&#104;&#111;&#111;&#46;&#99;&#111;&#109;">&#98;&#97;&#115;&#105;&#108;&#97;&#100;&#97;&#109;&#115;&#64;&#121;&#97;&#104;&#111;&#111;&#46;&#99;&#111;&#109;</a>]]></description>
            <dc:creator>Basil Adams</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 17:28:16 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390729,2390729#msg-2390729</guid>
            <title>Looking for MGC part [Illinois, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390729,2390729#msg-2390729</link>
            <description><![CDATA[ Looking for a tie bar for 1969 MGC for the front end]]></description>
            <dc:creator>Fred B.</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 20:57:26 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390608,2390608#msg-2390608</guid>
            <title>FS mgb tonneau bars &amp;amp; bag [ohio, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390608,2390608#msg-2390608</link>
            <description><![CDATA[ MGB all. I have the bars and storage bag for the tonneau cover. These are in the original paint and the bag is free of scrapes and tears. They sat on the shelf and not in the boot. Price $75 plus shipping]]></description>
            <dc:creator>farmer bob</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 15:20:50 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390499,2390499#msg-2390499</guid>
            <title>Wanted - Offenhauser Intake &amp;amp; Assmbly for 2.8 Ford/Mercury [Sacramento, California, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390499,2390499#msg-2390499</link>
            <description><![CDATA[ Looking for USED Offenhauser Intake for a 2.8L Ford/Mercury Capri that is in my MGB.  Would like as complete as possible (intake, water neck, carb, ... etc).  Offy Intake number is 6097. Offy water next number is 6278.  Hoping someone has one laying around collecting dust and would like to see it go to a good home :).   <br />
<br />
Many thanks!]]></description>
            <dc:creator>GBGeorge</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 13:23:14 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390489,2390489#msg-2390489</guid>
            <title>wtb MGB head casting, cracks OK [Berkeley, CA, USA] (8 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390489,2390489#msg-2390489</link>
            <description><![CDATA[ I want to use it as a jig for welding up a custom manifold. Prefer pick-up in SF Bay area as shipping would be much more than it's worth.]]></description>
            <dc:creator>timfred</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Wed, 12 Jun 2013 15:17:28 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390407,2390407#msg-2390407</guid>
            <title>rostyle wheels [Pittsburgh, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390407,2390407#msg-2390407</link>
            <description><![CDATA[ Anyone is welcome to pickup 3 rims.... Im in the south hills, Pittsburgh pa.  Hoping someone can use them - free to a good home.]]></description>
            <dc:creator>AHark</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 11:23:33 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390385,2390385#msg-2390385</guid>
            <title>FS: Alternator Pulley &amp;amp; Fan [Michigan, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390385,2390385#msg-2390385</link>
            <description><![CDATA[ If you've ever needed a pulley for your Lucas alternator, you'll know they aren't that easy to find.  At least it wasn't when I was looking (coulda just been me). Anyway, I have a pulley in very good shape and repainted, and the alternator fan.  I can even throw in a lifetime supply of woodruff keys (a set of 5) if you'd like them, even though you only need one.  $20 shipped.]]></description>
            <dc:creator>billgknapp</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 11:03:49 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390379,2390379#msg-2390379</guid>
            <title>FS: Ash Tray [Michigan, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390379,2390379#msg-2390379</link>
            <description><![CDATA[ No, I don't smoke in my MGB.  I don't even smoke.  But how could I not buy a new ash tray as I was fixing up my console?! Now I have a different console and no longer need the ashtray.  I think I spent $2,500.00 for it new (slight exaggeration) and it is still in very good shape.  It has a couple of little marks on the top, which are barely noticeable and not objectionable, to me.  $20 including shipping.]]></description>
            <dc:creator>billgknapp</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 10:59:32 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390376,2390376#msg-2390376</guid>
            <title>SOLD: Buick 215 Rocker Arm Assemblies [Michigan, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390376,2390376#msg-2390376</link>
            <description><![CDATA[ These are sold.  Pair of rocker arm assemblies, oil splash deflector and bolts, from a 1962 Buick 215 V8.  In great shape, except one rocker arm tip is missing, so that one arm needs to be replaced. $40 + shipping for the pair.]]></description>
            <dc:creator>billgknapp</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 10:54:01 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390370,2390370#msg-2390370</guid>
            <title>FS: Seat Frames from '73 MGB. [Michigan, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390370,2390370#msg-2390370</link>
            <description><![CDATA[ I bought these seat frames to rebuild and put in my MGB, but then changed direction and ended up with RV8 seats and interior. They just need a quick wire brushing and repainting.  Everything works as it's supposed to, and both recliner levers are included.  One of the seats needs to black ball knob for the flip forward function. Since I try the follow the &quot;buy high sell low&quot; credo, how about $25 + shipping for the pair?]]></description>
            <dc:creator>billgknapp</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 10:45:52 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390363,2390363#msg-2390363</guid>
            <title>FS: New Coil [Michigan, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390363,2390363#msg-2390363</link>
            <description><![CDATA[ For sale, new Napa coil.  Never used.  I ended up having two coils at once and only needed one.  $15 shipped.]]></description>
            <dc:creator>billgknapp</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 10:40:16 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390286,2390286#msg-2390286</guid>
            <title>WTB 15&amp;quot; Center Lock Alloy Wheels [Virginia, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390286,2390286#msg-2390286</link>
            <description><![CDATA[ I'm looking to buy a set of 15&quot; Center Lock Alloy Wheels for an MGA (also fits Austin Healey 3000/TR6) for autocross.  I don't need brand new wheels but ones in good shape.  If you have a set that you would like to sell please e-mail or call me and let me know the condition and the asking price.<br />
<br />
Ed Chan<br />
703-721-1771<br />
<a href="mailto:&#99;&#97;&#112;&#105;&#116;&#97;&#108;&#100;&#114;&#105;&#118;&#105;&#110;&#103;&#64;&#121;&#97;&#104;&#111;&#111;&#46;&#99;&#111;&#109;">&#99;&#97;&#112;&#105;&#116;&#97;&#108;&#100;&#114;&#105;&#118;&#105;&#110;&#103;&#64;&#121;&#97;&#104;&#111;&#111;&#46;&#99;&#111;&#109;</a>]]></description>
            <dc:creator>echan</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 09:22:18 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390273,2390273#msg-2390273</guid>
            <title>WTB 1275 rear engine plate [Harpers Ferry, WV, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390273,2390273#msg-2390273</link>
            <description><![CDATA[ I am looking for a rear engine plate for a 1275 MG Midget/AH Sprite in decent condition. No cracks and flat. part number is AEG 552.]]></description>
            <dc:creator>ggnagy</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 13:00:54 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390112,2390112#msg-2390112</guid>
            <title>1975 MG Midget For Sale! [Michigan, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390112,2390112#msg-2390112</link>
            <description><![CDATA[ 1975 Mg Midget 46,000 miles, I traded my Harley for it and now have #2 child on the way so I have to sell... It starts right up, trans shifts perfectly, interior in nice condition, seats have a couple rips, no rust on the body,  I have well over $1000 in extra parts that come with the car (spare convertible top, header pipe, core support, radiator, 2 carbs, speedometers, fuel gauges and moldings .  Could be worth double of what Im asking with just a little work.  First $2850 takes it!  Call 586 306 2363 if interested!]]></description>
            <dc:creator>Cburge34</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Tue, 11 Jun 2013 01:23:00 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390053,2390053#msg-2390053</guid>
            <title>3/4&amp;quot; Dual master Cylinder pistons [IL, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390053,2390053#msg-2390053</link>
            <description><![CDATA[ I am looking for the two pistons for a 3/4&quot; bore Master Cylinder for Sprite &amp; Midget or maybe MGA fitted with disk brakes. <br />
<br />
If anyone has a used set or knows where I can get new ones (ouch !), please let me know. <br />
<br />
If you have a seized 3/4&quot; Master Cylinder in need of refurbishment, I would also be interested in that. <br />
<br />
Cheers <br />
Lew]]></description>
            <dc:creator>lewmac</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 10 Jun 2013 23:19:07 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2390041,2390041#msg-2390041</guid>
            <title>UPDATED -WTB  67 MGB GT Misc  Stuff (see Pics) [Ca., USA] (3 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2390041,2390041#msg-2390041</link>
            <description><![CDATA[ One Upper taillight-Red     One Signal lens-All Amber  and the rest are marked in the pics.  Thanks, Dan]]></description>
            <dc:creator>danc</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Thu, 13 Jun 2013 13:21:09 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2389952,2389952#msg-2389952</guid>
            <title>1977 Midget for sale SW Missouri [Springfield, MO, USA] (no replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2389952,2389952#msg-2389952</link>
            <description><![CDATA[ I need to sell this car soon, as much as it pains me. But I am moving to another state and an apartment building.<br />
The car ran before I started the restoration. I have rebuilt the engine and repainted the car.<br />
I have a new interior kit, clutch kit, and lots of other new parts.<br />
Any serious offer considered.<br />
I live in Springfield, Missouri.<br />
<img src="https://post.craigslist.org/imagepreview/m/3re3M33Hc5E45q35H4d66d15a61cf214e1230.jpg" class="bbcode" border="0" /><br />
<img src="https://post.craigslist.org/imagepreview/m/3M43N43q45Ia5ra5qcd6600b757c5b32c1c64.jpg" class="bbcode" border="0" />]]></description>
            <dc:creator>dewright23</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 10 Jun 2013 20:50:13 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2389744,2389744#msg-2389744</guid>
            <title>SOLD:  Air Cleaners [port ewen, USA] (2 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2389744,2389744#msg-2389744</link>
            <description><![CDATA[ I have a set of AUD405 carbs for sale that fit 70-71 MGBs. All pistons,linkages,and jet bushings move freely.They come with the linkages,heat shield, manifold,and if desired a set of Stelling and Hasting Air Cleaners. The carbs need rebuilding and the throttle shafts are worn. The heat shield has the typical stress crack starting in the upper right side and also has some surface rust. The carb spacers have had a small additional hole drilled and the air cleaners have some pitting. I want $130 for the carb set up and a additional $20 for the air cleaners plus shipping. I will sell the air cleaners separately. Thanks, Dale.      Carb set up sold, air cleaners are still available. Thanks, Dale]]></description>
            <dc:creator>dales72mgbgt</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 10 Jun 2013 20:22:07 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2389696,2389696#msg-2389696</guid>
            <title>MGB RB Roadster Door Panels [Washington, USA] (11 replies)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2389696,2389696#msg-2389696</link>
            <description><![CDATA[ I replaced mine with new ones minus the speaker cutout, so these are black with the speaker hole and in better than average shape.  They came off my 77 so please make sure the application is the same for yours. You'll need the attaching gizmos as all mine were good and reused.  <b><u>I will send them to you for shipping cost alone, and confirmation that you have donated to Skye on this site.</u></b>  OKAY RANTERS?  (:P)]]></description>
            <dc:creator>SpridgetNut</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Sat, 15 Jun 2013 13:45:59 -0500</pubDate>
        </item>
        <item>
            <guid>http://www.mgexp.com/phorum/read.php?42,2389681,2389681#msg-2389681</guid>
            <title>Stromburg and Induction Heater  [Florida, USA] (1 reply)</title>
            <link>http://www.mgexp.com/phorum/read.php?42,2389681,2389681#msg-2389681</link>
            <description><![CDATA[ Working Stromburg and Induction Heater from a running 75 MGB. $50 plus shipping]]></description>
            <dc:creator>Pineridge5342</dc:creator>
            <category>Buy, Sell &amp; Trade Forum </category>
            <pubDate>Mon, 10 Jun 2013 21:17:30 -0500</pubDate>
        </item>
    </channel>
</rss>
