Completed the rear wiring
New oil through the engine
Drilled a new hole to run the wiring harness along the drivers side door
Reset the positioning of the door closers to align correctly and installed the shims that the paint shop had completely left out
Piped in the overflow pipe
Ordered the steel braided fuel lines after much measurement
Tomorrow is flushing the cooling elements of the engine before connecting the new radiator up that is in-situ.
And if I've time getting the heater box painted and installed... and flaring the ends of a new pipe between the wheelboxes as it is about 1/8 inch too short and distorting the run slightly...