MGB & GT Forum
my new threshold plates install
Posted by Lou65
Topic Creator (OP)
Dec 9, 2016 07:12 AM
Joined 7 years ago
25 Posts
|
finishing touches on my 66 and i thought i would finish it off with some threshold plates
but did not want to drill into the body work so i decided to cut the head off S/S screws and cold weld glue them over the pre drilled holes, and used thin 3M double sided tape to mount them in place this way the air circulating too prevent rust occurring.
the end result looks like it drilled in.
cheers Lou
but did not want to drill into the body work so i decided to cut the head off S/S screws and cold weld glue them over the pre drilled holes, and used thin 3M double sided tape to mount them in place this way the air circulating too prevent rust occurring.
the end result looks like it drilled in.
cheers Lou
Attachments:
Dec 9, 2016 10:55 AM
Joined 12 years ago
1,540 Posts
|
Nice touch Lewis, thanks for sharing!
Like the ribbed rubber inner sill covers too.
Cheers,
Jeff
1974 MGB GT, 18V+.030, Richard Longman head, OD, HIF4's, rebuilt 25D w/points, ALTIMAX RT43-185/70's on Minotaurs.
Some days I wish I could go back in life. Not to change anything, just to feel a few things twice.
Like the ribbed rubber inner sill covers too.
Cheers,
Jeff
1974 MGB GT, 18V+.030, Richard Longman head, OD, HIF4's, rebuilt 25D w/points, ALTIMAX RT43-185/70's on Minotaurs.
Some days I wish I could go back in life. Not to change anything, just to feel a few things twice.
tampaguy
Jack Shea
|
Dec 9, 2016 11:13 AM
Top Contributor
Joined 10 years ago
6,637 Posts
|
Forums
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster