MGExp

MG Midget Forum

distributor question

Moss Motors
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor

zeebo271 greg v
tampa, FL, USA   USA
Sign in to contact
Hello,

I have a 1979 midget and a question. It originally had a Lucas opus distributor. The distributor has a 3 wire plug. My new distributor only has 2 wires. One wire goes to the negative on the coil, and the other wire goes to the 12 volt side of the ballast wire. Any idea which wires are which? Or should I not use the old harness at all? How could I find the 12 volt side of the ballast then?
Thanks for your help,
Greg



1979 midget

Was this post helpful or interesting?
Yes No Thank
. Become a Supporting Member to hide this ad & support a small business
B-racer Avatar
B-racer Jeff Schlemmer
Shakopee, MN, USA   USA
Sign in to contact
The solid white wire should be a full 12V, a stripe added will be reduced voltage. Make sure you don't use the factory coil with your new distributor or it won't last long.



jeff@advanceddistributors.com

Was this post helpful or interesting?
Yes No Thank
zeebo271 greg v
tampa, FL, USA   USA
Sign in to contact
Thanks for the tip smiling smiley I have a new coil as well..so far so good.

greg



1979 midget

Was this post helpful or interesting?
Yes No Thank
. Become a Supporting Member to hide this ad & support a small business

To reply or ask your own question:

or

Registration is FREE and takes less than a minute

Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster





Join The Club
Sign in to ask questions, share photos, and access all website features
Your Cars
1976 MG MGB
Text Size
Larger Smaller
Reset Save