MG Midget Forum
Troubleshooting with the Victoria British Heavy-Duty Headlight Harness
Posted by JingChai
Troubleshooting with the Victoria British Heavy-Duty Headlight Harness
#1
This topic is about my 1970 MG Midget MkIII
|
|
Topic Creator (OP)
Jul 4, 2015 12:00 AM
Joined 11 years ago
854 Posts
|
I had another topic where my low beam wouldn't turn on for the headlights but the high beam worked. It turns out I have a VB headlight harness (Item 10-679) that's plugged into the connector under the right front fender. My best guess is the low beam relay went out and I need a replacement.
For those that have the VB headlight harness, is this the most likely cause of what I'm experiencing?
Thanks!
For those that have the VB headlight harness, is this the most likely cause of what I'm experiencing?
Thanks!
S1 Elan
Kurt. Appley
|
Jul 4, 2015 07:43 AM
Top Contributor
Joined 11 years ago
8,013 Posts
|
tomshobby
Tom Smith
|
Jul 4, 2015 02:37 PM
Joined 14 years ago
1,881 Posts
|
Get your meter out and check the input and output at the relay. If the relay does not work VB has them listed in their catalog. I have this relay system in my TR6 and Midget. They are excellent. The only problem I had was with the relays in the TR6. The relays became corroded inside and had to be replaced. Of course I washed the engine bay every time I washed the car and the relays were mounted in such a way that water got in them when washing the bay. Like the old saying, "Too soon old and too late smart."
Tom Smith
1974 Midget
1976 TR6
Tom Smith
1974 Midget
1976 TR6
James E
Jimmy Campbell
|
Jul 4, 2015 07:07 PM
Joined 12 years ago
4,462 Posts
|
I use that system on my blue car and in the winter when its cold the high beam doesn't want to let go so I'm running both beams for a while till the relay lets go. When its warm there is no problem. Thinking the relays are sub-standard so later I'll be picking up some at AutoZone.
about 3 weeks and 17 hours later...
Topic Creator (OP)
Jul 26, 2015 01:05 PM
Joined 11 years ago
854 Posts
|
Forums
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster