MG Midget Forum
Spring and suspension removal
Posted by jray8
Topic Creator (OP)
Sep 28, 2016 06:05 PM
Joined 9 years ago
403 Posts
|
I want to pull the front suspension and steering off and wasn't quite sure what my Haynes manual was trying to explain. something about inserting bolts somewhere to get the springs out. I would just start removing stuff but a spring under tension could ruin my day.
Can someone please dumb it down for me?
Can someone please dumb it down for me?
nassau66
Larry Cross
Browns Mills, NJ, USA
Sign in to contact
1966 Chevrolet Corvette
1966 MG Midget "Pennywise" 1972 Honda Z600 1973 Volkswagen Type 3 Wagon & more |
Sep 28, 2016 06:48 PM
Joined 9 years ago
325 Posts
|
There are four bolts securing the spring pan.
Remove two of those bolts (diagonally opposed).
Replace them with two fully threaded bolts about 3" long. Snug them up.
Remove the other two original bolts (short).
Evenly loosen the two long bolts you installed. This will gradually reduce the pressure on the spring.
Reverse procedure above to reinstall your springs.
Remove two of those bolts (diagonally opposed).
Replace them with two fully threaded bolts about 3" long. Snug them up.
Remove the other two original bolts (short).
Evenly loosen the two long bolts you installed. This will gradually reduce the pressure on the spring.
Reverse procedure above to reinstall your springs.
Topic Creator (OP)
Sep 28, 2016 08:42 PM
Joined 9 years ago
403 Posts
|
Forums
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster