MG Midget Forum
Replacing my dizzy...
Posted by garrycook
garrycook
Garry Cook
|
Topic Creator (OP)
Jun 22, 2017 01:17 PM
Joined 6 years ago
66 Posts
|
I pulled the dizzy today, as I realized that the DPO had taken it apart and not put it back together 100% correct. I fixed the rubber grommet and then popped open the workshop manual to determine what it might take to overhaul it.
Before I get any further, this is a 75 FED 1500 with the original Lucas 45DE4 distributor.
Apparently, I'm also missing one of the screws that hold the vacuum advance unit on, as well as the felt pad and anti-flash shield. I'm wondering why bother digging in to overhaul if I'm missing parts.
I'd like to stay original, if possible, but I guess I'm open to other options. Should I be looking to buy a new dizzy? Or is there a rebuild kit and parts I can buy (didn't see any on VB, I'll check elsewhere).
Before I get any further, this is a 75 FED 1500 with the original Lucas 45DE4 distributor.
Apparently, I'm also missing one of the screws that hold the vacuum advance unit on, as well as the felt pad and anti-flash shield. I'm wondering why bother digging in to overhaul if I'm missing parts.
I'd like to stay original, if possible, but I guess I'm open to other options. Should I be looking to buy a new dizzy? Or is there a rebuild kit and parts I can buy (didn't see any on VB, I'll check elsewhere).
ken472
Ken Petersen
|
Jun 23, 2017 07:14 AM
Top Contributor
Joined 9 years ago
1,491 Posts
|
Forums
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster