MGB & GT Forum

Hello I have been looking for a complete set of poly bushings for my 69 gt, I have seen companies offering complete sets but seems to not include A, the cross member pads or B, roll bar bushings, has anyone bought a set with all? if so where, Im looking to spend about $100.00.

This appears to have what you're looking for:

http://www.energysuspensionparts.com/packagedeal023

---

“Ideological certainty easily degenerates into an insistence upon ignorance". Daniel Patrick Moynihan

In any debate, the side which strays from civil discussion is usually the side that lacks confidence in its debate position or in the merit of their arguments. Making personal attacks on the opponents instead of staying on the subject is also a sign of weakness.

Anyone who feels compelled to respond in kind to any perceived slight is often suffering from narcissism.

The kit noted by Bob above does include the lubricant (confirmed with Entergy just now). Keep in mind these type bushings are full floating so all contact surfaces should be clean and liberally coated with the lube.

I installed the Prothane set with lube ten years ago and have had no issues.

Hi Bob I have been looking at that but no cross member pads, I would like to get a list of all bushings my B should have so I can make sure Im getting all, nothing like starting a job and missing items you thought were included.

From Prothane:
http://www.prothanesuspensionparts.com/2649017

"has anyone bought a set with all" - Yes (but as Superpro is just down the road from me I didn't buy a full set I bought the individuals to make up a full set because at that stage they didn't sell a complete kit as shown in the link below).

Doesn't Moss sell this kit? It has everything except as far as I can see the anti-roll bar eye bushes. AFAIK Superpro don't make those but I think Moss now has a poly version for the front ARB. I doubt you'll find a complete set for $100.

---

Mk1: CKD 11/66 first registered 8/5/67; owned since 3/77. 18GB +40 balanced. Peter Burgess BVFR head. Piper 285. 123. FidanzaFW. 4synch c/r box. Lots more as I did a nut and bolt rebuild; finished 2015. Tartan Red.

GT: December '78. VW Golf guards, flush fit front and rear valances. Torana XU1 vents, frenched indicators & Mk1 rear lights. 'Worked' Rover V8 with Monsoon ECU for EFI. GM4L60E, Lokar tiptronic & Quick4 controller. Vintage Air A/C. FC IFS. CCE 4 link rear. Salisbury with Quaife. Jaguar Storm.

(but as Superpro is just down the road from me I didn't buy a full set I bought the individuals to make up a full set because at that stage they didn't sell a complete kit as shown in the link below).


Can you buy trade from there Barrie ..because I couldn't get from there...I had to order through Supercheap ?....cost me about $300.00 in the end !

When I bought mine I got them from a suspension shop that they own - Stafford branch of Fulcrum Suspensions. So if you have the right credentials you can get Trade.

---

Mk1: CKD 11/66 first registered 8/5/67; owned since 3/77. 18GB +40 balanced. Peter Burgess BVFR head. Piper 285. 123. FidanzaFW. 4synch c/r box. Lots more as I did a nut and bolt rebuild; finished 2015. Tartan Red.

GT: December '78. VW Golf guards, flush fit front and rear valances. Torana XU1 vents, frenched indicators & Mk1 rear lights. 'Worked' Rover V8 with Monsoon ECU for EFI. GM4L60E, Lokar tiptronic & Quick4 controller. Vintage Air A/C. FC IFS. CCE 4 link rear. Salisbury with Quaife. Jaguar Storm.



Edited 1 time(s). Last edit at 2016-09-29 07:11 PM by MGB567.

Cheers ..yes no problem getting trade ...you don't need much credentials for that ...I was not aware of their affiliates ...thanks